The Choicer Voicer Beginner's Guide: How to Start and Play

How to Start The Choicer Voicer in The Choicer Voicer

The Choicer Voicer looks like a quick party game, but its real hook is making your voice match a clip under the judges’ spotlight. Before you start, understand what you’re downloading, what content you need, and how a typical session works.

The tutorial interface guides players through microphone setup and vocal warm-ups.

The Choicer Voicer is a downloadable early access alpha available on Windows and Linux. Before playing, verify that the current build is compatible with your platform—especially on Linux, where testing has been limited. The game is available through the YeahMaybe itch.io game page, where you can pay $5.00 USD or more to download the full game.

Here’s the expectation that catches many new players: the base installation supplies a customizable game framework rather than a large built-in clip library. You’ll need to install or create content packs, including voice packs with the audio clips you’ll perform. That flexibility is the point of The Choicer Voicer, but the first launch can feel sparse if you expect a fully stocked party-game library.

Main game modes support 1-4 players, with rounds lasting a few minutes. Play solo to practice against the judges, or bring friends together for local party play. Online multiplayer is not currently implemented, so plan around solo sessions or players sharing the same local setup.

This guide walks you through starting The Choicer Voicer, preparing your microphone and content, customizing packs and contestants, playing Game Show Studio, Dub Mode, and Twitch Mode, then fixing common PC, multiplayer, and Steam Deck problems. Once you know that The Choicer Voicer is a creative framework as much as a finished party game, you’ll be ready to build a session that actually has material to perform.

How to Test Your Microphone with the No Gameplay Demo in The Choicer Voicer

The microphone is the one thing you’ll want to verify before committing to the full The Choicer Voicer experience. A free test build lets you catch recording problems early—especially if your audio setup uses surround sound.

Official tutorial assets for configuring audio hardware.

Download No Gameplay Demo 0.5.0 from YeahMaybe itch.io and launch it before purchasing the full game. Use the demo to complete a recording check: speak into your microphone, then confirm that the game detects your live input and records your voice correctly.

If the signal is missing, check the selected input device and adjust the available audio effects in the microphone test. You can also use the Settings mic test in the full game for the same basic check once you have access.

⚠️ Watch out: Microphone recording may fail with a surround-sound output or input configuration because of Godot audio limitations. If that happens, switch to a simpler stereo setup or try an alternate audio route before testing again.

Run No Gameplay Demo 0.5.0 and finish this microphone check before buying the full game. Trust me, it’s much better to discover an unusable audio setup in the free demo than after purchase. Once your voice is being detected and recorded, you’re ready to move on to the actual performance setup.

Best Microphone Setup for The Choicer Voicer

A clean recording chain matters more than flashy hardware in The Choicer Voicer. The game’s scoring focuses on your vocal delivery, so a reliable input and clear monitoring setup will do more for you than an expensive studio microphone.

Proper hardware configuration ensures your voice is captured accurately during play.

Best Microphone Setup for The Choicer Voicer

Use a Headset microphone as your starting point. A modest, clear headset microphone is usually enough for The Choicer Voicer because delivery matters more than expensive hardware. Keep the microphone close enough to capture your voice clearly, but avoid placing it directly against your mouth to reduce unwanted breath noise.

Before entering a scored round, open the Settings mic test and enable Live microphone monitoring. Speak normally and confirm that you can hear or inspect the signal before recording. If you hear feedback or an echo, disable monitoring; you still need the microphone input active, but you do not need to hear your voice played back continuously.

Fixing Silent Recordings

If your recording is silent despite the microphone appearing connected, the issue may be your audio configuration rather than the headset itself. The game has known microphone limitations, particularly with complicated or surround-sound setups. Try a simpler audio route first, then test again.

For a more advanced Silent recording workaround, route the game output to an unused audio device. Add that output as an OBS audio source, then enable OBS monitoring to hear your microphone input. This workaround bypasses the problematic internal route and has helped some players recover usable microphone feedback.

The game can also behave differently with different hardware, so try an external microphone if your normal input remains silent. If multiple microphones fail, check that the correct input device is selected, microphone access is allowed for the game, and your audio drivers are updated.

⚠️ Watch out: The first recording after launching The Choicer Voicer may have its beginning clipped in some versions. Perform a short test recording before the scored round so you do not lose the opening words of your best impression.

Once your input is clear, monitoring is comfortable, and the first-recording issue is checked, you are ready to perform without fighting your audio setup. With this configuration, you can focus on matching the clip instead of wondering whether The Choicer Voicer recorded anything at all.

How to Reach the Main Menu and Customize The Choicer Voicer

The opening screen of The Choicer Voicer is your control room for everything from game modes to presentation tweaks. Because the game uses mouse-driven menus, take a moment to familiarize yourself with the visible buttons before jumping into a round.

The primary menu interface for The Choicer Voicer.

Reaching the Main Menu

Launch The Choicer Voicer to reach the Main Menu, the opening screen where you can access game modes, Customize, Extras, and Settings. The game’s menus and selection screens are mouse-driven, so click the option you want rather than relying on a documented keyboard gameplay scheme.

From here, use the visible controls to move between the game’s major systems:

• Choose a game mode to start playing.
• Open Customize to change content packs and presentation options.
• Open Extras for tools such as voice-pack editing.
• Open Settings for audio and other game options.

Using the Customize Menu

Select Customize from the Main Menu to open the Customize Menu. This is where you select content packs for the major parts of The Choicer Voicer, including menus, judges, studios, hosts, and contestants.

The Customize Menu controls presentation rather than the basic voice-recording loop. Choose the visual or character packs you want, then use the selection screens to change:

• Menu aesthetics
• Game show studio
• Judge panel
• Host
• Contestant appearance

These options let you reshape the look and personality of a session. For example, changing the judge panel or host affects how performances are presented, while changing the game show studio alters the visual backdrop. Contestant packs let you adjust the player-facing presentation separately.

Navigating With the Mouse

The Choicer Voicer’s interface is built around clicking options and thumbnails in its menus and selection screens. Use the game’s visible controls to select packs, open categories, preview available content, and return to the previous menu; no keyboard gameplay scheme is documented for these screens.

If a selection takes a few seconds to appear, give it time—large content packs may need to preload their clips. Once you’ve selected the presentation packs you want, return to a game mode and start your session.

With the Main Menu and Customize Menu understood, you can make The Choicer Voicer feel like your own game show before recording a single performance. Next, stock it with voice packs and clips so the judges have something to hear.

How to Find Voice Packs in The Choicer Voicer

The Choicer Voicer’s first judged round depends on having something to perform. If the game opens to an empty selection, don’t panic—the base experience relies heavily on voice packs, and the judges need audio clips before they can evaluate your impression.

Official screenshot of the game's unique vocal-based gameplay.

Open the Voice pack directory in The Choicer Voicer game files and look for the packs_voice folder. This is where you place or manage voice-pack folders. Each Voice pack is a folder inside the packs_voice folder containing audio samples, and you select that pack from voice-pack selection to supply prompts for all game modes.

To inspect what you have installed, open the Voice Pack selection screen or the Customize Menu. Select a pack, then click a thumbnail to play the clip. Use this to confirm that the prompt loads correctly and that the pack contains the kind of material you want to perform before starting the round.

In The Choicer Voicer 0.5.0, clips may need to preload before filtering and error reporting works, which can take several seconds for packs with large file sizes. Give the selection screen a moment rather than assuming the pack is broken. Once you can preview a clip, you’re ready to choose your prompt and step into the game show.

How to Create a Voice Pack in The Choicer Voicer

In The Choicer Voicer, your first custom pack can be ready in minutes—no coding or complicated tools required. All you need is a folder, a few short audio clips, and something funny for your friends to imitate.

Adjusting settings is crucial for ensuring your voice pack functions correctly in-game.

1. Open the local game files and create a new folder inside packs_voice. Give the folder a clear name so you can recognize it later, then add your audio files. You do not need coding or a specialized editor for this basic voice-pack creation workflow.
2. Prepare each voice-pack audio clip as a WAV, MP3, or OGG file under 60 seconds. The game uses these files as playable vocal-impression prompts, so choose clips that are short enough to hear and imitate without losing the original delivery.
3. Normalize the volume of every clip before adding it to the pack. Make the audio loud enough rather than quiet: larger waveforms are easier for The Choicer Voicer’s scoring algorithm to compare, while small waveforms can make scoring less reliable and the pack more frustrating to use.

For fresh content, try recognizable movie lines, memes, quotes, or personal recordings. A good mix gives players different tones and delivery styles to imitate, and rotating packs helps keep The Choicer Voicer from feeling repetitive when the default material runs out.

Once the folder contains your short, normalized clips, return to the game and select the new pack from the voice-pack selection screen. With your first custom prompts installed, you’re ready to turn The Choicer Voicer into your own comedy game show.

How to Edit Voice Packs in The Choicer Voicer

In The Choicer Voicer, version 0.5.0 finally puts voice-pack organization inside the game. Instead of managing every detail by hand, you can use the built-in metadata tools to make clips easier to identify, filter, and use in different modes.

Metadata and content settings are accessible within the game menus.

Open the Voice Pack Editor

From the Main Menu, open Extras, then select Edit Voice Packs & Clip Metadata. This opens the Voice Pack Editor, the built-in editor introduced in version 0.5.0.

Select a voice pack or one of its samples to update its presentation and metadata. The editor lets you:

• Assign images to individual samples
• Add captions to clips
• Add tags for sorting and filtering
• Enter data specific to dub packs
• Assign an icon to represent the voice pack
• Add a subtitle beneath the pack name
• Change the displayed pack name
• Add contributing authors
• Write a description or readme for the pack

The displayed name does not have to match the pack folder’s name, so use the editor to give your collection a clearer title. Adding author names also makes the pack easier to find later through the author search.

Add Tags and Filter Clips

Use tags in the Voice Pack Editor to group clips by category. For example, you can organize samples by character, mood, or scene type, then filter the pack to find the kind of performance you want.

Nested folders inside voice packs are automatically treated as unique tags. This can save time when your pack is already divided into folders, but you can disable nested-folder tagging in Options if you prefer to manage every tag manually.

Search by Author and Wait for Pack Loading

On the Voice Pack selection screen, search for a creator by prefixing the search with author:. This is especially useful when you have several packs installed and want to locate everything made by one contributor.

The game preloads clips to support filtering and error reporting. Large packs may take several seconds to finish loading, so don’t assume the pack is broken if its clips do not appear immediately. Wait for the preload to complete before troubleshooting, then use the selection screen to inspect the pack and its available samples.

Once the metadata is saved, your packs are easier to search, sort, and prepare for Game Show Studio or other modes. With the Voice Pack Editor, even a huge custom library stays manageable—so you can spend less time hunting for clips and more time delivering the perfect impression.

How to Add Voice Pack Images in The Choicer Voicer

Your voice pack can sound perfect and still look unfinished if its samples display without images. In The Choicer Voicer, matching audio with the right artwork makes prompts easier to recognize during selection and keeps custom packs feeling polished.

Assign Images to Individual Clips

Matching clip images are the most direct option. In your voice-pack folder, add an image that shares the exact filename of an audio clip. For example, an audio clip named my_clip automatically uses an image also named my_clip, if that image exists. This image then displays for the matching sample.

If a clip does not have its own image, use a Pack filler image. Add an image named _pack_filler_image to the voice-pack folder, and The Choicer Voicer will use it for clips without an individual image.

You can also use the Pack icon fallback by adding an image named _icon to the voice-pack folder. The game can use _icon as an alternative filler image for audio clips that do not have a matching image or another assigned image.

Add a Pack Icon and Subtitle

The Pack icon and subtitle display options are available in the Voice Pack Editor. Assign an icon to represent the voice pack visually, then add a subtitle to display underneath the pack name on the voice pack selection screen. The icon helps you recognize the pack quickly, while the subtitle can identify its theme or content at a glance.

With individual images, a _pack_filler_image, or the _icon fallback in place, your samples will display reliably throughout The Choicer Voicer. Add the pack icon and subtitle afterward, and your custom voice pack is ready to select.

How to Reach Game Show Studio Mode in The Choicer Voicer

The Game Show Studio is where The Choicer Voicer’s competitive side comes alive: pick a voice pack, step up to the stage, and let the judges decide whether your impression lands. It supports a solo session or local multiplayer, so you can practice alone before challenging your friends.

Entering Game Show Studio

1. From the Main Menu, select Game Show Studio mode.
2. Choose a working voice pack when prompted. The selected pack supplies the audio clips used for the performance rounds.
3. Set up your session for solo play or local multiplayer with 1-4 local players.
4. Complete a microphone check before starting the first round. If no prompt appears, return to pack selection and choose a different voice pack. If your input is missing, go back to Settings and check your microphone routing.

The standard judge panel in Game Show Studio consists of computer-controlled judges. They evaluate each player's impression, then provide scores and commentary after the performance. The judges are the same panel judging the round, so make sure your selected pack actually contains playable audio before inviting everyone to the stage.

How Local Turns Work

Game Show Studio uses a local turn order. With 1-4 local players, each player takes a turn performing the same or selected prompt before everyone compares the results. In solo play, use the rounds to compare your current score with your previous attempts; with friends, the same prompt makes differences in delivery much easier to spot.

Once the voice pack loads and every microphone is ready, start the round and follow the on-screen prompt. The computer-controlled judges then score each impression and provide commentary, giving the group a clear result to compare before the next player takes their turn.

With a working voice pack, a confirmed microphone, and your local player order ready, you’re set for The Choicer Voicer’s main competitive format. Choose your prompt, take the stage, and make the judges remember your performance.

The Choicer Voicer Core Loop: Selecting Prompts and Recording

The round starts quietly, then the timer and your microphone turn a harmless audio clip into a tiny stage performance. In The Choicer Voicer, success comes from listening closely before you ever speak—not simply reading the line and hoping the judges are feeling generous.

1. Select a prompt. In Game Show Studio, choose or receive a short audio sample from the selected voice pack. Listen carefully before recording so you know exactly what kind of performance the round expects.
2. Study the source clip. During the prompt presentation, hear the reference clip and pay attention to its words, tone, rhythm, timing, and delivery. Notice where the speaker pauses, which words receive emphasis, and how much energy the line carries. The Choicer Voicer rewards an impression that captures the source’s performance, not just its wording.
3. Record your performance. When the recording phase begins, speak into the microphone to imitate the selected clip. Match the source rather than merely reading the words—copy its rhythm, vocal character, pauses, and overall feeling as closely as you can.
4. Review the take. Live microphone input creates a waveform while you perform, giving you immediate feedback that your voice is being captured. After recording, recorded playback lets you hear the take before judges score it. Use that moment to catch a clipped opening, weak volume, or a delivery that drifted away from the reference.
5. Submit for scoring. Once you are satisfied, submit the performance. The computer judges compare the vocal impression and return a score and commentary. Treat the result as useful feedback: adjust your tone, timing, or delivery on the next attempt instead of chasing the score blindly.

The Choicer Voicer’s core loop is simple: select a prompt, listen, imitate, review, and submit. Give yourself a few seconds to understand the reference before recording, and each round becomes much more manageable.

The Choicer Voicer Scoring: Tone, Timing, and Delivery

In The Choicer Voicer, repeating the correct words is only the start. The judges also listen for how closely your performance matches the reference clip’s sound, rhythm, and personality—so a technically accurate line can still score poorly if the delivery feels flat or mistimed.

Match the Tone, Not Just the Words

During the recording, focus on tone matching: match the source’s vocal quality and pitch instead of focusing on words alone. Listen for whether the reference sounds bright, deep, breathy, tense, relaxed, or energetic, then shape your voice toward that character.

A common mistake is to treat the prompt like a reading exercise. The Choicer Voicer is comparing your vocal impression with the source, so correct pronunciation without a similar tone may not be enough. Replay the clip and copy its overall sound before worrying about perfect word accuracy.

Copy Timing and Cadence

Timing and cadence matching matter just as much. During reference playback, reproduce the source’s pauses, rhythm, timing, and cadence. Before recording, rehearse the clip’s beat by quietly tapping or mouthing along, paying attention to when each phrase begins, where the speaker pauses, and how quickly the line moves.

Follow the Inflection and Energy

Your delivery and inflection matching determine whether the impression feels convincing. During the performance recording, imitate the source’s emphasis, energy, and overall feeling. Notice which words receive extra stress, where the pitch rises or falls, and whether the speaker sounds excited, dramatic, sarcastic, calm, or uncertain.

If the source demands an exaggerated delivery, use an exaggerated delivery yourself. Underplaying a dramatic clip is one of the easiest ways to lose the character of the impression. Go bigger than you normally would when the reference clearly calls for it—the judges need to hear those vocal choices.

How Waveform Comparison Affects Scores

The judge scoring also uses waveform comparison. The game compares your recorded waveform with the reference waveform, so provide a sufficiently loud, clean signal. Quiet waveforms are harder to score, while clipping, background noise, or an inconsistent microphone level can make the comparison less reliable.

This does not mean shouting into your microphone. Keep your voice clear and consistent, avoid moving far away from the mic, and record in a way that gives the game a strong signal without distortion. If your take sounds quiet during review, redo it with steadier projection rather than changing every aspect of the impression at once.

Enable Easier Scoring from Judges

If your recordings are consistently quiet, open Settings and enable the default Easier scoring from judges option. This setting uses increased maximum-waveform weighting to improve results with quieter clips, making the judging system less punishing when your waveform does not reach the same level as the reference.

It is still better to submit a clean, sufficiently loud recording whenever possible. The setting helps with quieter clips, but it does not replace good microphone technique or accurate vocal matching.

The winning approach in The Choicer Voicer is to train these elements separately: match the tone and pitch, rehearse the timing and cadence, then perform the emphasis and emotion with enough energy for the waveform comparison to recognize. Once all four line up, your score will reflect the impression—not just the words you managed to repeat.

Best Performance Practice for The Choicer Voicer

The Choicer Voicer can feel chaotic when everyone is trying to out-perform everyone else, but a simple practice routine makes your impressions much more consistent. Focus on one source clip at a time, listen with purpose, and treat every take as something you can refine.

A Repeatable Practice Routine

Before recording, replay or preview the source clip and listen for four details:

1. Words: Make sure you know exactly what is being said.
2. Pitch: Notice whether the voice rises, falls, or stays at a steady level.
3. Pauses: Mark the spaces between words and phrases instead of rushing through them.
4. Emotional delivery: Listen for the energy, attitude, emphasis, and character behind the line.

After that, perform one focused take. Don’t try to fix everything at once—choose the most noticeable feature, such as the rhythm or pitch, and build your impression around it. In The Choicer Voicer, matching the feeling and shape of the performance matters more than simply repeating the correct words.

Review Every Take

After recording, listen to the recorded playback and inspect its waveform before retrying. Check for clipped words, weak volume, or timing drift that makes your version start late, end early, or lose the source clip’s rhythm.

Use each review to make one specific adjustment. If the volume is weak, speak with more presence; if words are clipped, slow down slightly; if the timing drifts, rehearse the pauses before recording again. This keeps practice productive instead of turning into a string of random retakes.

Performing in Multiplayer

In a four-player Game Show Studio round, a quiet or subtle impression can disappear beside louder performances. Make your delivery clear and energetic, and emphasize the source clip’s rhythm and character so your performance is not lost beside louder performances.

That does not mean shouting every line. Instead, make the important words, pauses, and emotional changes easy to hear. The Choicer Voicer rewards a recognizable performance, so a confident impression with strong timing often stands out better than a technically accurate reading delivered without energy.

⚠️ Watch out: Don’t copy another player’s volume just because they are loud. Keep your speech clear, then exaggerate the rhythm and character that make your impression recognizable.

Prioritize Performance Over Hardware

You do not need to buy an expensive microphone to improve at The Choicer Voicer. A modest headset can be sufficient when your speech is clear and your timing, pitch, and delivery match the source clip.

Spend your practice time on reference listening and playback review before upgrading your equipment. With a clear performance setup and this repeatable routine, you’ll hear exactly what needs work—and your next impression will already be stronger.

The Choicer Voicer First Objectives and Beginner Checklist

Your first session in The Choicer Voicer should be quick and low-pressure: confirm your audio works, load something to perform, then complete one judged impression. Follow these four objectives in order and you’ll avoid the most common beginner confusion.

1. First objective—verify recording. Before the first scored round, run the No Gameplay Demo or open the Settings mic test. Speak into your microphone and confirm it produces input. If the signal is missing, fix your audio routing before continuing; there’s no point entering a judged round if The Choicer Voicer can’t capture your performance.
2. Second objective—install content. After microphone verification, select an existing voice pack. If you don’t have one ready, create a packs_voice folder and add short WAV, MP3, or OGG clips under 60 seconds. The game relies heavily on player-made content, so don’t panic if the initial installation feels more like a framework than a full clip library.
3. Third objective—preview the prompt. From voice-pack selection, preload or preview the chosen clip before entering the round. Listen for the words, timing, tone, and volume—not just what the speaker says. This short pause gives you a clear target and makes your first attempt much easier to judge.
4. Fourth objective—complete a scored take. Enter Game Show Studio, record one impression, listen to the playback, and submit it to the judges. Treat the score as feedback rather than a progression requirement: your first goal is learning how The Choicer Voicer hears your delivery, not chasing a perfect result.

Beginner Checklist

Before inviting friends or building a large custom pack, make sure you can:

• Confirm microphone input in the No Gameplay Demo or Settings mic test.
• Select an existing voice pack or add clips to a packs_voice folder.
• Use WAV, MP3, or OGG clips under 60 seconds.
• Preview or preload a chosen clip.
• Complete one recording in Game Show Studio.
• Listen to your playback and submit it for judging.
• Use the result as practice feedback, not as a requirement to unlock anything.

Once you’ve cleared those steps, you’re ready to experiment with different clips, invite local players, and start shaping The Choicer Voicer around your own material.

How to Reach Dub Mode in The Choicer Voicer

In The Choicer Voicer, Dub Mode is your escape from score pressure: head to the Main Menu, select Dub Mode, choose a dub pack, and record voiceovers for an existing scene without competitive judging. It uses the same recording foundation as the game’s judged rounds, but there’s no computer judge panel waiting to grade every take.

How Dub Packs Work

A dub pack must be prepared with the right scene data. Using the Voice Pack Editor or the game files, create a dub pack folder containing voice-pack audio, an OGV video file, and timing metadata. The timing metadata tells The Choicer Voicer when each audio clip belongs in the scene, allowing the pack to function as a scene-based dubbing experience.

Once you’ve selected a valid dub pack in Dub Mode, you can choose between two recording styles:

• Clip-by-clip dubbing: Select individual clips from a dub pack and record each voice-over separately. This is the best low-pressure introduction to recording because you can focus on one line at a time rather than performing over an entire scene.
• Freestyle Dub Mode: Choose Freestyle Dub Mode to play the entire video live while recording a continuous voice-over. This feels more like performing a full scene, so it’s ideal once you’re comfortable with the clip-by-clip format.

After finishing a Dub Mode performance, you can save and rewatch the dub. The replay stores audio data rather than creating a video file, then uses the dub pack’s metadata to reconstruct the performance when you view it again. That makes it easy to revisit a take without needing to export a finished video.

Dub Mode is the most relaxed way to get comfortable with The Choicer Voicer’s voice-over tools. Pick a short clip, perform it without worrying about a score, and move to Freestyle Dub Mode when you’re ready to take over the whole scene.

How to Reach Twitch Mode in The Choicer Voicer

Twitch Mode turns The Choicer Voicer into a live audience event—the computer judges step aside, and your viewers decide whether each impression deserves applause or a roast. Set it up before the performance starts so chat can participate from the first round.

Entering the Twitch Variant

From the Main Menu, open the Twitch Variant under the Twitch streamer mode, then connect a stream. This mode replaces the standard judge panel with audience interaction, so your viewers—not the computer-controlled judges—become the decision-makers.

During a Twitch Variant performance, viewers vote on each impression. Their live audience judgment replaces computer-controlled scoring, creating a much less predictable challenge than the regular Game Show Studio format.

Assigning Twitch Panelist voting Judges

Twitch Panelist voting lets you assign up to five Twitch usernames as judges during the Twitch setup. Add the usernames you want to handle the judging, and the computer will fill any unused judge slots if you assign fewer than five.

This gives you more control over who shapes the show while keeping the panel full. In The Choicer Voicer, Twitch Panelist voting works especially well when regular viewers or friends each bring a different standard for timing, tone, and delivery.

Using a Twitch Chatter pack

A Twitch Chatter pack is a content pack in the game content files that contains keyword-linked audio files. When viewers use a matching keyword, the associated audio file can play during game-show sessions, letting chat trigger vocalizations as the performance unfolds.

With Twitch chat voting and a Twitch Chatter pack working together, The Choicer Voicer becomes more than a voice-matching game: your audience can judge the impression and actively add audio to the show. Configure the Twitch Variant, assign your Twitch Panelist voting judges or let the computer fill the unused slots, then test a few keywords before going live.

How to Customize Contestants in The Choicer Voicer

Your contestant is more than a name on the podium—customizing them gives every round in The Choicer Voicer a personal signature. Set up the visuals first, then add the identity details that make your player pack feel like a real show contestant.

Create or Edit a Player Modpack

Open the Player Customization Menu from Main Menu, choose Customize, then select contestant or player customization. From here, you can create or edit a player modpack. If you’re starting fresh, use the in-game Add New Pack button; the game creates a pack with default values that you can personalize.

You can also manage the files directly through the Player modpack directory in the The Choicer Voicer game files. Open the packs_player folder, then create a new folder for your player modpack manually. The folder name identifies the pack internally, but it does not automatically become the contestant’s displayed name.

Add the Contestant Image

Inside your player modpack in the packs_player folder, add a Player image named player. The game supports PNG, JPG, or WEBP files, and the image should be non-animated. It is preferably at least 1000 pixels tall, since the player image is not scaled by the game.

Keep the filename as player so the game can find it. Animated image formats are not natively supported, so stick with a still image for reliable results.

Set the Name and Colors

Return to Player Customization and open the Overview page. Use the player color fields to set the contestant’s displayed name and assign two colors. The displayed name is separate from the player modpack’s folder name, so change it directly if you want the on-screen contestant to use a different identity.

Those two colors appear on the contestant podium and the individual score screen. Pick a combination that clearly represents your character and remains easy to recognize when several players are taking turns.

Add Introduction Text

Open the Details page in Player Customization to enter the contestant introduction. You can use formatted introduction text, and the game shows a preview beneath the input box so you can check how it will appear before playing.

Take a moment to verify the preview before starting a round—small formatting mistakes are much easier to fix here than while everyone is waiting in the studio. Once the image, identity, colors, and introduction are set, your custom contestant is ready for The Choicer Voicer’s game-show spotlight.

How to Configure Player Reactions in The Choicer Voicer

Your contestant can do more than stand on the podium—custom reactions let them celebrate, complain, greet the host, and respond to every score. In The Choicer Voicer, setting these lines up is straightforward once you understand the nine reaction slots.

Open the Player Customization menu and go to the Details page for your selected player modpack. You’ll find nine slots covering:

• One winning reaction
• One losing reaction
• One introduction greeting
• Six round-score reactions for scores 0 through 5

For each slot, enter the filename of the audio clip you want The Choicer Voicer to play. Add the matching Player reaction audio file inside the selected player modpack in the packs_player folder. The file can be WAV, MP3, or OGG, and the filename you enter must match the file you placed in that modpack.

Each reaction slot handles its own situation: the greeting plays when your contestant is introduced, the winning and losing reactions play at the end of a game, and the score slots respond to individual round results. You can leave any slot blank if you want silence, or assign the same audio file to multiple slots. Use the play button beside each filename field to test the assigned reaction before launching a round.

Older custom contestants still work with the newer setup. In The Choicer Voicer version 0.4.12 and earlier, player reactions used three specifically named files: talk_greet for introductions, talk_upset for low scores and losing, and talk_cheer for high scores and winning. Newer versions retain those old assignments for backward compatibility while also letting you replace them with separate reaction slots for scores 0 through 5, introductions, winning, and losing.

Once your files are in the right modpack and each slot plays correctly, your contestant has a complete voice set. With those reactions configured, your custom player will feel like a real game-show contender instead of a silent avatar.

How to Fix The Choicer Voicer Launch and Crash Problems

A failed launch can kill the mood before the first ridiculous voice performance even begins. If The Choicer Voicer refuses to open or crashes immediately, start with the quick fixes below and work toward deeper changes only when necessary.

Quick PC Launch Fixes

1. Restart Windows and close conflicting programs. If The Choicer Voicer fails to open, restart Windows first, then close conflicting or unwanted programs before launching the game again. Background software can interfere with the game’s available system resources, so this simple reset is worth trying before advanced changes.
2. Launch with administrator access. From the Windows game shortcut, right-click The Choicer Voicer, choose the administrator option, and permanently enable Run as administrator. This can grant the game the access it needs when a normal launch fails.

Check Antivirus and Game Updates

1. Add an antivirus exception. If Avast blocks launch files, open Menu, then Settings, General, and Exceptions. Select ADD EXCEPTION, then add the legitimate game path or URL. Other antivirus programs use similar exception tools, but only add the official game files or source.
2. Confirm the current game build. Open the game launcher, go to its Update options, and enable automatic updates or perform a manual update. Afterward, restart the launcher and try The Choicer Voicer again. Running an outdated version can create compatibility issues, especially in an early access game that receives ongoing fixes.

If the crash continues after these steps, note any error message and contact The Choicer Voicer’s official support through its website’s Support or Contact options. Include your system details and the troubleshooting steps you already tried, so support can narrow down the cause faster. With a clean restart, the correct permissions, an antivirus exception, and the current build, you’ve covered the most likely PC launch problems.

How to Fix The Choicer Voicer Multiplayer Lag on PC

Multiplayer stutter can ruin a good round of The Choicer Voicer before anyone gets a chance to deliver their best impression. Work through these fixes in order, starting with your connection and ending with PC resource settings.

1. Check your connection. Move closer to the Wi-Fi router, then test your speed with SpeedTest.net. If the connection is below requirements, contact your ISP before troubleshooting the game further.
2. Restart your network. Power off the Wi-Fi router and cable modem for 20 seconds. Power them back on, wait for the connection to return, and retry your The Choicer Voicer multiplayer session.
3. Reduce bandwidth use. Close downloads and streaming apps, and stop other bandwidth-heavy devices from using the network during multiplayer. Use Ethernet when possible for a more stable connection; this often makes a bigger difference than lowering visual settings.

1. Reset Windows DNS. On Windows 11, press Windows key + R, type cmd, and open Command Prompt. Run these commands one at a time:

   ipconfig/flushdns
   ipconfig/registerdns
   ipconfig/release
   ipconfig/renew
   

   Afterward, return your DNS settings to automatic, then launch The Choicer Voicer again and test multiplayer.

2. Reduce PC resource use. During PC gameplay, press Ctrl + Shift + ESC to open Task Manager. End task on intensive programs using excessive RAM, Disk, or network resources, then lower the game's resolution from 4K to 1080p or 720p and move the frame rate toward 60Hz.

If The Choicer Voicer still freezes after these steps, the issue may require help from the game's official support channels. Start with your internet connection, then restart the network, clear DNS, and finally reduce PC load—this sequence catches the most common causes without changing unnecessary settings.

How to Fix The Choicer Voicer on Steam Deck

Steam Deck crashes can be especially frustrating when you’re ready for a quick voice-acting session in The Choicer Voicer. Start with the simple checks, then work through storage, SteamOS, DNS, and Proton before considering a full reset.

Start with Steam Deck Basic Checks

Before changing advanced settings, verify The Choicer Voicer is compatible with your current Steam Deck setup. Remove any unauthorized mods, check that the Steam Deck is not overheating, and confirm your internet connection is stable. Then perform a proper force reboot by holding the power button for at least 12 seconds.

Switching between Game Mode and Desktop Mode is not the same as restarting the device. Give the Steam Deck a full reboot, then launch The Choicer Voicer again.

Diagnose the MicroSD Card

If The Choicer Voicer is installed on external storage, shut down the relevant apps and remove and reinsert the MicroSD card. Then compare its behavior with the game installed on the Steam Deck’s internal storage.

If The Choicer Voicer runs from internal storage but crashes from the MicroSD card, the card is the likely source of the problem. Test the card on another device or replace it; alternatively, keep the game installed directly on the Steam Deck’s internal storage.

Change Steam Deck DNS Settings

Network or DNS problems can sometimes contribute to crashes and unstable behavior. In Desktop Mode, select the Wi-Fi icon, choose your current connection, and open its IPv4 settings. Change the method from Automatic to Manual, then enter 8.8.8.8 and 8.8.4.4 as the DNS servers.

If the issue remains, repeat the DNS change for IPv6 as well. Restart the Steam Deck after saving the network changes and try The Choicer Voicer again.

Update SteamOS

An outdated SteamOS build can cause compatibility problems with games running on the Steam Deck. Press the Steam Button, open Settings, select System, and check for updates.

A yellow icon indicates that an update is available. Apply it, restart the Steam Deck, and repeat the same check until the device reports that it is current. Once SteamOS is fully updated, relaunch The Choicer Voicer.

Try a Different Proton Version

If The Choicer Voicer still crashes, test another compatibility layer. From your Steam library, open The Choicer Voicer Properties, select Compatibility, enable Proton, and try Proton Experimental or another listed version.

Restart the game after each Proton change. This is a useful test because different Proton versions can handle game startup, audio, and other Windows-game features differently on Steam Deck.

Factory Reset and Support

A factory reset should be your last resort, since it clears the Steam Deck’s data and software configuration. Open the Steam Button, go to Settings, choose System, and select Factory Reset only after trying the checks above.

If The Choicer Voicer continues crashing after the reset, contact Steam Deck Support. Include the steps you already tried and any error messages you saw so support can narrow down whether the problem is related to the device, storage, SteamOS, or compatibility settings.

With a force reboot, MicroSD diagnosis, current SteamOS build, working DNS, and a tested Proton version, you’ve covered the major Steam Deck crash causes. If none of those steps works, support is the right next move—don’t keep risking your data with repeated resets.